Kehua Cutting Technology (Wuxi) Co., Ltd. Service Hotline:+86 510 88278879
Cemented carbide drill, cemented carbide twist drill model, cemented carbide drill manufacturer, why the drill can’t move the angle iron, high speed steel drill linear speed
  • Contact:Mr. Xie
  • Phone:0086-510 88278879
  • Fax:0086-510 88276687
  • E-mail:sales @
  • Address:No.10,Shenjiang Road, Xixiashu, Xinbei District Changzhou, China
  • Web:Http:
[What factors should be considered when selecting a drill bit?]
Release date:[2024/3/29] Is reading[40]次

When choosing a drill, consider the following key factors:

The material. The material of the drill determines its performance, such as high-speed steel or carbide drill bits with high wear resistance and hardness, suitable for high-speed rotation and high temperature environments.

The sharpness. Sharp drill bits have greater cutting power, reduce cutting forces and heat accumulation, and extend service life.

The Specifications. Make sure that the drill bit specifications match the requirements. Different drill bits are suitable for different materials and aperture sizes.

Surface treatment. Some high-quality bits are surface treated (such as titanium nitride coating) to improve hardness and wear resistance.

Brand. Choosing a well-known brand can guarantee quality, as branded products are usually more focused on quality and durability.

Drill type. Common types include torsion bits (for lightweight materials), hammer bits (for heavy work, such as concrete and brick walls), and rotary bits (for fine work, such as glass and ceramics).

Drill bit shape. Different shapes are suitable for different drilling needs, such as straight bits for straight holes and tapered bits for cone holes.

Bit length. Select a bit length suitable for the drilling depth, with short bits for shallow holes and long bits for deep holes.

In addition, it is also important to choose the drill size according to the material. For example, when drilling for wood, a bit slightly smaller than the bore size should be selected, while when drilling for metal, the right bit should be selected based on hardness and adhesion.

Declaration: The content of this article is organized from the Internet, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.