Tool class

No matter what tool you choose, it is important to know:

What is the material processed? What machine is used for processing? Finish or rough finish? Are there any drawing requirements? What is the compression method? How much is the knife side? Blade size?

First, external round turning tool:

What is the required main deflection Angle of the tool? Are there any drawing requirements? What is the material processed? Are there hardness requirements?

Two, inner hole turning tool:

What is the diameter? How deep is the hole? What is the inside diameter of the tool sleeve? Does the inner hole interfere?

Three, slotting knife:

How deep do you want to cut? How wide is the slot? Is it face slot outer round slot or inner hole slot knife? What are the maximum and minimum machining diameters? (end slotted cutter specifically)

Four, cutting knife:

What is the diameter of the cut? What's the width of the slot?

Five, screw turning tool:

Screw turning tool forehand and backhand? External thread or internal thread? Metric or British? What is the pitch?

Cutter holder class

Milling cutter :(take machining center as an example)

What is the connection mode between tool and machine tool? BTNTCATISOR8DINEHSKMT

1. Clamping bit class:

Elastic collet or three - claw centering? How big a knife? ER?

What is the number of the taper shank? What is the length?

2. Clamping milling cutter type:

What size milling cutter is required for clamping? Do you want the strong one or the standard one or the high speed one?

Taper shank class what number of shank? How big is the threaded hole?

3. Clamping wire tapping:

Rigid tapping or flexible tapping? What size is the tap?

4. Clamping face milling cutter disc type:

What is the diameter of the cutter head? How big is the inner circle of the cutter head? Metric or Imperial holes? Is there a length requirement?

5. Boring knife:

A. coarse boring cutter

Modular or integral? What is the scope of processing required? The length of the processing? Is a lengthening rod required?

B. fine boring cutter

Modular or integral? What is the precision of machining? What is the length of processing? Is it required to extend the machining range by adding long rods?

6. The knife instrument:

Do you want a table or a digital display, or a projection? What is the range of measurement? What is the measurement accuracy?

The cutting tool class

one Cutter:

1. Integral milling cutter

Does the end mill need high speed steel or hard alloy? What is the hardness of processing? Less length required? How many blade? Ball head or crew head? What is the degree of the stalk? What is the thread size? What kind of coating? What is the Angle of spiral rise?

2. Blade type milling cutter

1) mandrel milling cutter

What is the required diameter? Is there any requirement for blade Angle? How long is the processing length?

2) cutter head;

What's the diameter? What is the Angle of the blade? Finish or rough finish? Do you require cutting tool to clear corners?

two Bit:

1) straight shank drill

Is the drill bit required to be high-speed rigid or hard alloy? What is the machining diameter? What is the depth of processing? Is there any requirement for blade?

2) Taper shank drill

What is the size of the original sleeve of the cutting tool? What is the machining diameter? What is the required machining depth? Is there any requirement for blade?

3. Tap class:

1) Screw tapping

Do you want a left-handed or a right-handed tap? What is the required thread size? Is it metric or British? What level of precision is the machining? What is the material processed? What is the standard of the handle?

2) straight groove wire tapping

What is the material processed? Is it hand attack or machine attack?

Four. Chamfering knife:

What is the range of chamfering required? What's the Angle?

Five. Reamer:

1) straight shank reamer

What is the depth of processing? What is the precision of machining? What is the diameter of the processing?

2) taper shank reamer

What is the size of the original cone sleeve? What is the depth of processing? What is the precision of machining? What is the diameter of the processing?