G3X (K01) hardness ≥91.5 has the best wear resistance among tungsten-cobalt-titanium-bai alloys, but its impact toughness is poor. It is suitable for high-speed precision of small sections of cast iron, non-ferrous metals and their alloys, broken fire steel, and alloy steel. Processing.
YG3 (K05) hardness ≥90.5, wear resistance second only to YG3X, more sensitive to impact and vibration, suitable for precision turning and semi-finishing turning, threading and reaming during continuous cutting of cast iron, non-ferrous metals and their alloys
YG6A (K10) hardness ≥91.5 is a fine particle alloy with good wear resistance. It is suitable for semi-finishing machining of chilled cast iron, non-ferrous metals and their alloys, and also suitable for semi-finishing machining and finishing of crushed fire steel alloy steel.
YG6 (K15K20) hardness ≥90 has higher abrasion resistance, but lower than YG3, impact and vibration resistance is better than YG3X. It is suitable for semi-finishing and finishing of cast iron, non-ferrous metals and alloys, and non-metal materials with medium cutting speed.
YG8 (K30) hardness ≥89.5 has high strength, impact resistance and shock resistance better than YG6, but the wear resistance and allowable cutting speed are lower. Suitable for low-speed rough machining of cast iron, non-ferrous metals and alloys, and non-metallic materials.
K0 type: used to inlay in the in-line cemented carbide drill bit (24.26.28.30.32.34.36.38.40.42, etc.),
Type T3: Alloy drill bits (T308, T310, T313) used for setting rotary drilling into rock formations,
T1 type: used to set drill bits in hard rock formations for rotary drilling (T105, T108, T110)